Ceramic tiles inspired by Gaudí’s Park Güell

Park Güell’s curving mosaic benches, rippling surfaces and bright ceramic fragments show Antoni Gaudí treating architecture as a living landscape. At Amelia Johannsen’s Barcelona studio, that language can be translated into clay without copying the monument itself. The aim is to capture its rhythm: irregular colour, softened geometry and the feeling that natural forces have shaped every edge.

Creating a series of ceramic tiles inspired by Gaudí’s Park Güell starts with observation rather than reproduction. Johannsen studies how a curve travels, how fragments form pattern and how sunlight shifts colour. She works between Barcelona’s Mediterranean character and the forests, mist and tidal forms of the Pacific Northwest. Each finished tile is individual, yet every piece belongs to the same visual family.

Reading Park Güell as a ceramic language

The first studio exercise is visual rather than technical: map the way the eye travels. A line rises, tightens into a spiral, then opens across a broad plane. These movements can become repeated arcs, raised ribs and gently warped borders. Johannsen also photographs how shadows collect in the depressions of a glazed surface, because a tile should remain interesting when removed from a wall and viewed at arm’s length.

Trencadís, the broken-tile mosaic associated with Gaudí’s park, offers a useful lesson in assembly. No fragment is judged alone; its colour and angle become meaningful beside its neighbours. In a contemporary tile series, that principle can appear as paired solids and voids, interlaced bands or an irregular grid whose joints remain visible. The composition celebrates the join rather than concealing it.

Movement links the project to broader fluid forms in motion. This reference sits alongside direct observation of Park Güell, encouraging an interpretation based on rhythm and flow instead of a literal recreation of its famous architecture.

Building a family of tiles

A coherent series needs a limited visual vocabulary. Johannsen works with a small family of square, narrow rectangular and elongated forms, each sharing a similar depth and edge treatment. Scale is adjusted so the pieces can form a concentrated composition or extend across a larger surface. Repeating proportions establishes continuity, while variations in relief and colour stop the arrangement from feeling mechanical.

Motifs are drawn from the landscapes informing the artist’s practice. Fern fronds, seed heads, water ripples and weathered stone sit alongside the curves and organic geometry found in Barcelona. This mixture gives each tile a connection to place without fixing it to one location. A fragment of Pacific Northwest forest can sit comfortably beside a Mediterranean blue, ochre or sea-green glaze.

The format also considers Australian interiors, where rendered brick, concrete and fibro surfaces commonly meet tiled splashbacks and feature walls. Standardised dimensions allow designers to plan around corners, shelves and alcoves, while a handmade edge gives the installation warmth. The series can therefore read as architectural decoration without losing the individuality of a piece made by hand.

Shaping clay, colour and surface

A smooth stoneware body provides a strong foundation for the sharper details within each design. After the clay is wedged, each form is pressed or built with deliberate variation. Corners are softened where the motif demands it and left crisp where structure needs definition. Relief lines are carved or modelled into the surface, allowing the pattern to emerge through both shadow and glaze.

Colour is built in layers rather than applied as a single flat coat. Earthy oxide washes settle into recesses, while translucent glazes gather differently over raised and lowered areas. The palette moves between terracotta, chalk, muted cobalt and mineral green, with occasional darker accents. Johannsen’s notes on the symbolism of waves connect this palette to the repeated use of flowing lines in her wider sculptural practice.

Surface finish gives the series its tactile range. Some tiles carry a satin sheen, while others remain matte, lightly crazed or textured like weathered rock. Small differences in glaze thickness create shifts from blue-green to deep teal. These variations are recorded across the series, so each tile retains its identity without departing from the established colour story.

Firing, testing and responsible selling

Prototypes are tested through bisque and glaze firings before the final forms are resolved. The process checks how the clay responds to pressure, how relief survives the kiln and whether the glaze settles naturally around textured areas. Test tiles also reveal whether a design remains legible at different sizes, especially when viewed from across a kitchen or beneath outdoor lighting.

Quality control considers warped edges, pinholes, dry patches and the fit between glaze and clay body. Crazing may be accepted when it forms part of the intended surface, but structural faults and unstable glaze are rejected. Finished pieces are then sorted by format and colour to support different installation patterns. Handmade variation is preserved where it adds character, while significant departures are kept out of the collection.

Australian buyers encounter the work through design stores, gallery exhibitions, online shops and weekend makers’ markets in cities such as Melbourne and Sydney. When selling directly, the Australian Consumer Law makes accurate descriptions and reasonably durable goods essential. Any proposed wet-area installation should also be checked against current National Construction Code, AS 3740 and applicable state or territory requirements, with suitable substrate preparation and waterproofing confirmed by the installer.

Installing the series in Australian homes

The strongest installation begins with the wall rather than the tile. Rendered masonry, brick and fibro substrates each require suitable preparation, and the adhesive must accommodate the particular surface and expected movement. Tiles can be arranged as a compact splashback, scattered across a feature wall or used to guide the eye through a passage. Visible joints help define the individual forms and reinforce the handcrafted character.

Climate and lifestyle shape how the work is displayed. Sydney’s salt-laden air, Melbourne’s rapid temperature changes and intense sunlight across Australian homes can all affect adhesives, sealants and colour perception over time. Outdoor rooms, alfresco dining areas and barbecue spaces also call for surfaces that feel connected to the landscape. Coastal colours and plant-like patterns can make that connection immediate.

The completed installation becomes a record of its making. Some walls reward close inspection, revealing changes in thickness, glaze and edge, while others form an expansive field viewed from a distance. This balance between individual tile and collective pattern reflects Park Güell itself: architecture becomes memorable through the repeated meeting of colour, material and natural form.

Explore Amelia Creations to view available and sold works, follow new creations on Instagram, join the mailing list and receive details about upcoming pottery workshops and related events.

Scroll to Top