How to mix a satin matte glaze for subtle earth tones
A satin matte glaze sits between a glossy surface and a chalky, dry matte. Its soft lustre suits restrained palettes of ochre, sand, olive, eucalyptus and burnt umber, especially on sculptural forms and everyday tableware. The aim is a controlled sheen: enough reflected light to reveal form without the mirror-like depth of a high-gloss glaze.
Trial batches are essential because clay body, kiln atmosphere and cooling all affect the result. The formula below is a practical starting point for an oxidised cone 6 firing. Treat it as a baseline, record every change and keep test tiles beside the finished work.
Build a stable satin base
Use this as the dry base: 40% potash feldspar, 20% silica, 15% whiting, 15% kaolin, 8% dolomite and 2% bentonite. A 1 kg batch means 400 g, 200 g, 150 g, 150 g, 80 g and 20 g respectively. This should give a soft satin surface on a suitable stoneware body when fired to cone 6 in oxidation.
Feldspar supplies most of the melt and helps the glaze flow, while silica controls the glassy structure. Whiting and dolomite broaden the firing range, and kaolin raises the alumina content, reducing shine and encouraging the muted surface. Bentonite helps keep heavier particles suspended, although excessive amounts can make the mixture feel thick and difficult to sieve.
The precise clay body still matters. A smooth white stoneware will usually show the colour more clearly than a heavily grogged or iron-rich body. If the first firing looks too glossy, increase the kaolin slightly; if it looks dry and chalky, replace a little kaolin with feldspar to improve flow and sheen.
Add earth colour without losing softness
Calculate colour additions against the weight of the dry base. For warm sand, begin with 4% red iron oxide and 1% rutile. A warm taupe can start with 5% red iron oxide, 0.75% manganese dioxide and 1% rutile. For muted eucalyptus green, try 3% red iron oxide, 2% rutile and 0.4% cobalt carbonate.
Oxides produce strong, transparent colour, so small adjustments can make a noticeable difference. Pre-mixed stains may also work well, but their strength varies between brands; follow the supplier’s recommended additions rather than treating a stain and an oxide as interchangeable. More than 8% total colourant can cause excessive running or crowding.
Sieve fine colourants before mixing and keep every pigment in a clearly labelled container. Labels should include the material name, supplier and date opened. A colour reference such as colour-mixing guidance can help with undertone comparisons, although a fired test tile remains the final measure.
Measure, blend and adjust the batch
Use a digital scale accurate to at least 0.1 g and weigh each material separately. Combine the base ingredients before adding the colourants, then add the calculated oxides or stain. Mix with water gradually until the glaze reaches a thick, creamy consistency, adding only enough water to make it workable.
Mix in a ventilated space and avoid creating or spreading dry silica dust. Wear suitable eye protection and use a P2 respirator where airborne dust is possible. A sieve and mixer make the process faster, while a sponge and small bucket are sufficient for smaller studio batches. Let the mixed glaze rest for several hours so the particles disperse evenly.
To reduce shine, replace about 3% of the feldspar with kaolin. For more fluid satin, replace approximately 3% of the kaolin with feldspar. If the colour is too dark, blend the batch with clean base glaze rather than adding more pale material indiscriminately. Split test batches before making larger corrections so you retain a record of the original result.
A practical studio checklist
Set up a small test system before scaling up. Use the same clay body, glaze thickness and firing position for each comparison.
Materials and safety
- A 0.1 g scale and labelled weighing cups.
- Base materials, colourants, an 80-mesh sieve and lidded bucket.
- Gloves, eye protection, a P2 respirator and relevant safety data sheets.
- Three bisque-fired tiles and suitable mixing tools.
Keep the test pieces numbered and keep one uncoloured base tile as a control. The control reveals whether changes come from the colourant or from the underlying glaze.
Mixing and firing
- Blend the base and colourants before adding water.
- Mix to a thick cream, sieve thoroughly and allow the batch to rest.
- Apply consistent coats to numbered tiles with the same dipping or brushing method.
- Record ingredient weights, firing cone, kiln position and cooling notes.
Compare the fired tiles in daylight and under warm indoor lighting. Satin finishes often appear glossier near a window, so assessing colour under several conditions prevents an incorrect correction in the next batch.
Fit the glaze into Australian studios and markets
Local conditions shape both production and presentation. Melbourne’s Rose Street Makers Market provides a practical venue for testing how muted glazes appear on handmade tableware. Sydney has a strong network of shared pottery studios and council-run ceramics rooms, while Brisbane’s humid climate can slow water release from thicker dipped pieces. Allow extra drying time there before the bisque firing.
Australian ceramic suppliers commonly sell base materials in 5 kg and 10 kg bags, with colourants available in smaller quantities. Compare the colour across test tiles from different brands because particle size and pigment strength can vary. Buy from suppliers that provide accurate labels and current technical data, and store all powdered materials in sealed, dry containers.
Under state and territory work health and safety laws, hazardous workplace chemicals must be labelled, and Safety Data Sheets must be readily available. If selling finished work or glaze online, the Australian Consumer Law still applies. Claims such as “food-safe” or “dishwasher-safe” need evidence, so keep untested functional ware labelled as decorative.
Studios can also use clay workshops to build interest in the process. The practical steps in host a clay-and-wine workshop can guide a relaxed social event while keeping glaze mixing and safety procedures clear.
Apply, fire and put the recipe to work
Apply the glaze to clean, bisque-fired ware and leave the base unpainted unless that contrast has been tested. Keep the lower edge consistent so the piece does not become overly heavy. Thin, even coats generally produce more reliable colour than one thick application, while wax resist can create definition if the timing is controlled.
Fire to the intended cone in a consistent atmosphere and use witness cones to confirm the heatwork. Do not rely on the kiln display alone. The cooling period also affects surface development, so record overnight results before changing the recipe. Test on the actual clay body you use commercially, not only on a convenient test clay.
Choose one 1 kg batch this week, make three test tiles and record the outcome before scaling up. Explore how soft lustres and natural forms interact in Amelia Johannsen’s ceramic portfolio, then follow Amelia Creations on Instagram or join the mailing list for workshop dates and studio updates.