How to photograph glossy glazes without reflections
Glossy ceramic surfaces can be deceptively difficult to photograph. A glaze that looks rich, deep, and luminous in person may appear covered in white streaks, dark bands, or distracting reflections in a digital image. The problem is rarely the pottery itself; it usually comes from uncontrolled light bouncing directly from the surface into the camera lens.
This matters when documenting available pottery, decorative plates, sculptures, or abstract ceramic art. Accurate photographs help viewers judge color, texture, shape, and finish while preserving the atmosphere of a handmade object. For an artist working between Mediterranean light and the quieter tones of the Pacific Northwest, the photograph should reveal the character of the glaze rather than the room around it.
The good news is that reflective ceramics can be photographed consistently with a simple setup. The key is to control the size and direction of the light source, watch the camera angle, and make small adjustments before reaching for heavy editing.
Understand what the glaze is reflecting
A glossy glaze behaves like a small curved mirror. It reflects whatever is positioned around it, including windows, lamps, white walls, dark clothing, camera bodies, and even the photographer’s hands. On a rounded vase or sculptural form, those reflections may stretch, bend, and move dramatically as the object or camera changes position.
Begin by inspecting the piece from the same height and direction as the camera. Look for bright patches and dark shapes on the glaze. A large white reflection may come from a window, while a narrow vertical streak often indicates a nearby light source or bright edge. Identifying the source makes it easier to remove or soften.
The color and finish also influence the result. Transparent, dark, and high-fire glazes tend to show strong highlights, while textured or satin surfaces scatter light more gently. Photographing an especially reflective piece may require more time than documenting an unglazed sculpture, so plan for several test frames rather than expecting the first image to work.
Choose broad, soft light
Large, diffused light is usually more flattering than a small bare bulb. A north-facing window, a translucent curtain, or a softbox can create a broad highlight that follows the form without producing harsh white spots. Direct sunlight should generally be avoided because it creates hard edges, extreme contrast, and rapidly changing reflections.
Place the light to one side and slightly in front of the ceramic object, then move it gradually until the glaze shows a controlled highlight. The aim is not to eliminate every bright area. Gloss needs some reflected light to communicate its smoothness. Instead, shape the highlight so it supports the volume of the piece and does not obscure important details.
A white reflector can lift dark areas on the opposite side, while a black card can add definition to pale or transparent glazes. Keep both cards outside the camera frame. Small flags made from foam board are especially useful because they block unwanted reflections without changing the entire lighting arrangement.
Adjust the camera before changing the glaze
Changing the camera angle by only a few degrees can move a reflection away from the lens. If a bright window appears as a broad white patch, raise, lower, or shift the camera rather than immediately repositioning the pottery. For plates and shallow forms, a slightly elevated angle may reveal the surface while reducing glare. For vessels, a level camera often preserves the silhouette and gives more control over the highlight.
Use a tripod whenever possible. It allows you to make careful changes to the light, polarizer, or object without losing framing. A low ISO, a moderate aperture, and a delayed shutter release will help retain clean detail. Avoid relying on an extremely narrow aperture to make everything sharp; diffraction can reduce the crispness of fine ceramic texture.
A circular polarizing filter may reduce some reflections, particularly from broad, flat areas. Rotate it while watching through the viewfinder or on the screen. It will not remove every highlight from a curved glossy glaze, and it can deepen or shift colors, so compare filtered and unfiltered frames before selecting the final image.
| Situation | Useful adjustment | What to watch for |
|---|---|---|
| Bright window reflected in the glaze | Move the window, camera, or object off-axis | Uneven highlights across curved forms |
| Dark ceramic looks flat | Add a large white reflector | Loss of edge definition |
| Pale glaze appears washed out | Use a black flag near one side | Gray or muddy color |
| Plate shows a central glare | Raise the light and change the camera angle | Uneven exposure across the design |
| Fine texture lacks detail | Use side light with soft diffusion | Shadows becoming too severe |
| Color varies between frames | Lock white balance and exposure | Inconsistent online presentation |
Build a controlled shooting space
A temporary studio can be made from a table, a neutral backdrop, two pieces of foam board, and one broad light source. Matte paper or fabric is preferable to glossy paper because the background should not compete with the ceramic surface. Mid-tone gray, warm white, or muted earth colors often provide more reliable contrast than pure white.
Keep the object several feet away from the background when space allows. This reduces unwanted shadows and gives the background a softer appearance. It also makes it easier to light the piece separately from the surrounding area. For small sculptures, a sweep of paper can create a seamless setting without visible corners.
Composition should reflect the object’s personality. A decorative plate may benefit from a direct, centered view, while a sculptural form may need a three-quarter angle to show its contours. Nature-inspired work can be framed with restraint: a quiet background and generous negative space usually communicate material and form more effectively than many props. Amelia’s Mediterranean clay landscape offers a useful reminder that layered shapes and surface details deserve room to breathe.
Use a repeatable color workflow
Before photographing a collection, set a fixed white balance instead of allowing the camera to guess from one frame to the next. A gray card or color reference placed beside the first piece can help you correct color during editing. This is particularly important for subtle blue, green, rust, cream, and sandy glaze tones that can shift under mixed indoor lighting.
Shoot in RAW when possible. RAW files preserve more information in highlights and shadows, giving you greater control over exposure and color without aggressively altering the surface. Reduce highlights carefully, recover shadows moderately, and avoid excessive clarity or sharpening, which can make natural glaze variation look harsh.
Capture one full view and several detail images. A close-up can show pooling, speckling, brushwork, crawling, or the transition between glossy and matte areas. For online portfolios, consistency is as important as beauty: similar scale, background, and color balance help visitors compare available and sold works with confidence.
Photograph the shine instead of erasing it
The goal is controlled reflection, not a completely reflection-free image. A soft, narrow highlight can describe the curve of a vessel and make a polished glaze feel tangible. If every highlight is removed, the surface may look flat, plastic, or incorrectly matte.
Review images at full size before moving on. Check the rim, shoulder, corners, and any highly polished details for clipped white areas. Also look for reflections of the room that may be subtle at thumbnail size but distracting on a portfolio page. A tethered screen or large monitor makes these issues easier to spot than a small camera display.
A consistent visual archive grows from a consistent practice. Notes about light position, camera height, lens choice, and reflector placement can save time during future sessions. Amelia’s reflections on daily throwing practice suggest the same principle: repetition builds sensitivity, and sensitivity leads to better decisions.
A practical setup to repeat
Use this short checklist before each photography session:
- Clean the glaze gently with a soft, lint-free cloth to remove dust and fingerprints.
- Turn off mixed room lighting and work with one consistent color temperature.
- Place a large diffused source to the side, then shape reflections with white and black cards.
- Lock focus, exposure, and white balance after composing the first test frame.
- Review highlights and color at full size before photographing the next piece.
Thoughtful documentation can become part of the making process rather than an afterthought. The same attention given to clay, texture, and balance can guide the camera toward images that feel honest and tactile.
To explore Amelia Johannsen’s pottery, decorative plates, sculptures, workshops, and available works, visit Amelia Creations and follow the visual details that make each ceramic piece distinct.