Making a Ceramic Dish for Holding Olive Oil and Salt

A small ceramic condiment dish can turn everyday ingredients into part of the table setting. Designed with one area for olive oil and another for sea salt, it brings together practical pottery, natural texture, and the quiet pleasure of serving food by hand.

This project suits a handbuilt approach because the form does not need to be perfectly symmetrical. A shallow dish, divided tray, or organically shaped salt cellar can be made with a few simple tools and adjusted to suit your kitchen, dining table, or outdoor meal.

The strongest designs balance beauty with use. The surface should feel inviting, the wells should be easy to clean, and the clay body must be prepared carefully enough to withstand drying, glazing, and firing.

Choosing the form and clay

Begin by deciding how the dish will be used. A two-section tray is useful when the oil and salt are served together, while a single shallow bowl works well for dipping bread. If the dish is intended for a dinner table, leave enough room around each well for fingers to reach the ingredients without touching the glaze.

Stoneware clay is a dependable choice for a functional serving piece. It becomes durable after a mid- or high-temperature firing and offers a broad range of glaze colors. A smooth, fine-grained clay creates a refined finish, while a lightly grogged body adds a tactile, handmade quality and helps the dish retain an earthy character.

The shape can echo the landscape that inspires it. Soft ridges may recall Pacific Northwest bark, while a sun-washed palette can suggest the Mediterranean coastline. Amelia Johannsen’s Pacific Northwest cedar patterns offer an example of how natural structures can become an expressive surface language.

Preparing the slab and building the base

Condition the clay before forming the dish. Wedging removes air pockets, distributes moisture, and gives the material a consistent texture. If this step is unfamiliar, review this beginner wedging guide before rolling out the slab.

Roll the clay to an even thickness of about 8 to 10 millimeters. Use guide sticks beside the slab roller or rolling pin so the base does not become thinner in the center. Cut a rounded rectangle, oval, or freeform silhouette, then compress both faces with a rib. This strengthens the surface and helps reduce warping as the clay dries.

For a divided dish, add a low central ridge rather than a tall wall. Score and slip the joining areas, press the divider into place, and blend the seams from both sides. A gentle partition is easier to clean and leaves enough space for oil to be poured without splashing.

Shaping wells, rims, and details

Create each depression by pressing with a small smooth form, such as a wooden tool, a rounded stone, or the back of a measuring spoon. Work gradually so the base remains thick enough to support the dish. Compress the inside of each well with a rib or fingertip, removing any sharp transitions that could trap food residue.

The rim should be comfortable to hold. A slightly raised edge helps contain olive oil, but an overly high wall can make dipping awkward. Pinch or coil a narrow border onto the slab, then blend it carefully into the base. Keep the outside underside flat, since an uneven foot can scratch a tabletop or prevent the dish from sitting steadily.

Small decorative marks can be added while the clay is leather-hard. Try incised lines, simple botanical impressions, or a thumbprint border. Avoid deep cuts inside the oil well, where grooves may be difficult to clean. Texture is most effective when it supports the form instead of competing with its practical purpose.

Balancing glaze, texture, and food use

The glaze should serve both the appearance and function of the dish. A glossy interior is generally easier to wipe clean, while a satin or semi-matte finish can provide a softer, more natural look. Test the glaze on a tile or small sample first, especially when using dark clay, oxides, or layered colors.

Keep raw clay away from areas that may regularly contact oil or salt unless the material and firing schedule have been tested for that purpose. A properly fired, food-safe glaze is the safer choice for the wells. Follow the glaze manufacturer’s temperature instructions, since an underfired surface may remain absorbent and an overfired one may deform.

Design choice Practical benefit Visual effect
Two shallow wells Keeps oil and salt together Clear, balanced composition
Single dipping bowl Easier to make and clean Simple, sculptural silhouette
Low central divider Separates ingredients without blocking access Subtle architectural detail
Glossy interior glaze Wipes clean more easily Bright, reflective surface
Textured exterior Adds grip and handmade character Organic, tactile finish
Flat compressed underside Protects the table and improves stability Clean, considered base

Drying and firing without cracks

Dry the finished piece slowly and evenly. Place it on a breathable surface, cover it loosely with plastic, and turn it occasionally so one side does not dry faster than the other. Pay particular attention to the divider and joined rim, where changes in moisture can create stress.

When the dish is fully dry, inspect the underside and smooth away rough edges. The first firing, known as the bisque firing, makes the piece firm enough to glaze while retaining enough porosity for the glaze to adhere. Never rush a piece into the kiln while it still feels cool or damp; remaining moisture can cause serious damage during heating.

After glazing, wipe the foot clean and check that no glaze has pooled underneath. Fire according to the clay and glaze specifications. Once cooled, examine the surface for pinholes, crawling, sharp edges, or areas where the glaze has separated from the clay.

Serving olive oil and salt with confidence

Olive oil is best poured into the dish shortly before serving, particularly if the piece has an absorbent or textured exterior. A narrow pouring bottle or cruet can help control the amount and keep the rim clean. Flaky sea salt, finishing salt, or a coarse blend can sit in the second well and provide a pleasing contrast to the liquid.

Handwashing is often preferable for a small handmade condiment dish. Use warm water, mild dish soap, and a soft sponge. Avoid leaving oil in the dish for long periods, and do not use abrasive cleaners that could dull the glaze or collect in surface texture.

A handmade oil and salt dish also makes a thoughtful companion to bread, roasted vegetables, grilled fish, or a simple Mediterranean-inspired meal. Its role is modest, but its presence can slow down the act of serving and make familiar ingredients feel more intentional.

Practical recommendations for a successful piece

Keep the first version uncomplicated. A well-proportioned form with clean joins will usually be more satisfying than a highly decorated dish that is difficult to use.

  • Choose a tested stoneware clay and a compatible food-safe glaze.
  • Compress the slab and all joined seams to reduce weak points.
  • Make the wells shallow enough for easy dipping and cleaning.
  • Dry the dish slowly under loose plastic before bisque firing.
  • Test the finished glaze with oil and water before regular use.

Ceramic workshops are an ideal setting for this kind of project because a teacher can help with clay preparation, joining, trimming, and kiln planning. A hands-on session paired with wine and tapas also reflects the social pleasure of the finished object: the dish is made for sharing, tasting, and gathering around a table.

Browse Amelia Creations to discover pottery, decorative plates, sculptures, and nature-inspired abstract work from Barcelona. Follow the studio’s latest pieces and workshop events on Instagram, or subscribe to the mailing list for updates on upcoming clay experiences and new available works.

Scroll to Top