Ribbon tools and undulating water ripples
Water has a rhythm you can recognise in a calm inlet, a rain-swollen creek or a wave drawing back from shore. Barcelona-based ceramic artist Amelia Johannsen translates that movement into clay. Using a ribbon tool to create undulating water ripples is a tactile way of shaping flow across a plate, bowl or sculptural panel: a narrow ridge rises beside a hollow, then the next curve carries the eye onward.
For Australian potters, the coastal reference feels familiar: Sydney’s harbours and Pacific beaches offer the same interplay of still water and moving light. The technique needs little specialist equipment, making it approachable for home studios, community classes and independent ceramicists looking for a fresh way to decorate functional ware.
Reading water through clay
Johannsen’s practice draws on the Pacific Northwest and Mediterranean coastline, but the effect need not depict a literal seascape. It can suggest current through repeated arcs, changing depth and soft shadows between waves. The eye should be able to travel around the form without meeting a harsh stop, so continuity matters more than perfect symmetry.
Sketching the movement can help, but keep the plan loose. Try one long wave, two overlapping S-curves or several offset arcs separated by narrow bands of untouched clay. At Melbourne Design Week, makers display functional ceramics among broader design stalls, and this kind of surface can hold attention across the room as well as in the hand.
How the ribbon tool shapes a wave
A pottery ribbon tool is a thin, flexible blade held between metal or wooden arms, usually finished with a handle. Its narrow edge can shave a fine channel, while a wider version removes broader ribbons of clay. Drawn across leather-hard clay with a light, even stroke, the blade leaves a trough and a low ridge. Two connected features are therefore created in one pass.
The undulating effect depends less on heavy pressure than on the direction and shape of each movement. Angle the blade slightly, use a controlled rocking motion and swing the handle through a gentle S rather than pulling in a straight line. Let one stroke approach another without fully crossing it. Vary the pressure to deepen a shallow swell, then ease away so the surface relaxes into the next curve.
Choose a broad platter when you want the movement to read across the whole vessel, and a smaller bowl when it should wrap around a curved interior. Broad serving dishes suit the shared platters of an Australian Christmas lunch. For another intimate table, a guide to backyard wedding photography shows how an informal setting can make a handmade platter feel personal.
Preparing a calm, practical workspace
Start with smooth stoneware or refined earthenware that rolls evenly without coarse particles interrupting the blade. A 5 mm slab gives a useful starting thickness for a 25 cm plate, although the final measurements should follow your intended shape. Work on a plaster bat or firm board, and gather these essentials first:
Practical tools for the first session
- Flexible ribbon tool, ideally one narrow and one broad
- Plaster bat or rigid, canvas-covered work board
- Wooden rib, trimming loop, sponge and small bowl of slip
- Pencil, slip-forming bottle and damp cloth
The clay should be leather-hard: firm enough to retain a clean edge but still workable with a light touch. Test it on an offcut before approaching the plate. Keep the surface free of loose dust and use only enough water or slip to guide the blade. If the tool catches, it is usually moving across a dry edge rather than sliding through the clay body.
Quick fixes for common problems
- Let the clay firm slightly if the blade tears or lifts a fuzzy edge.
- Blot excess slip with a clean sponge if the surface drags and smears.
- Use a cleaner, firmer stroke if a shallow ripple almost disappears.
Local conditions affect timing. Brisbane’s humid summers can keep clay softer for longer, so judge moisture by feel rather than by the clock. After bisque firing, glaze settles into the troughs and rides over the ridges. Amelia’s notes on everyday cone 6 glazes explain the appeal of reliable mid-fire glazes for useful ware; follow the firing chart supplied with your own clay and kiln.
Building a flowing surface
Start on a small test tile and establish the rhythm before covering a large surface. Draw the ribbon in one continuous movement, return to the starting point with a light touch, and leave breathing space between neighbouring channels. If a line stops abruptly, soften that end with your finger or a wooden rib. Small corrections stop the pattern from looking scratched rather than fluid.
Build depth gradually. A first pass can establish the route, a second can sharpen the trough, and a third can clarify the ridge without cutting through the form. Change the blade angle to widen a wave, or use the corner of the tool to begin a tighter turn. On a bowl, support the inside with a rib and turn the vessel slowly beneath the blade so the curve remains even.
Once the clay is fully dry, soften sharp edges with a fine abrasive and wipe away the dust before glazing. A transparent or pale blue-green glaze will collect differently in the channels and on the raised edges, revealing the depth without needing several colours. Make a small glaze test first, since a crowded pattern can disappear beneath a heavily layered surface.
Make a ripple of your own
The quickest way to learn is to make one plate, not a full dinner service. Roll a small slab, mark a loose wave and complete three controlled ribbon strokes. Photograph the piece under side light so the shadows reveal the undulations. This exercise teaches pressure, speed and support more clearly than unstructured marks.
For a social version of the process, Amelia’s Barcelona workshops combine hands-on clay work with wine and tapas, making a new platter part of the shared experience. Visit Amelia Creations to browse available and sold pieces, find workshop details, follow the Instagram updates or join the mailing list for new events. Choose a smooth slab, make three controlled strokes and see where the water takes you.